Scorpion

 

Scorpion Model Products is pleased to announce the release of our new series of Brushless Outrunner Motors. These motors raise the bar in both quality and performance, and are establishing themselves as the new Gold Standard for model aircraft power! All of the Scorpion Brushless Motors are manufactured from the finest quality components using state of the art CNC machine tools. Every component of the motors are of the highest quality, from the materials used, to the box they ship in. They are designed to provide reliable power for your model aircraft at affordable prices, offering a total performance solution

Brushless Outrunner Motors

Scorpion Model Products is pleased to announce the release of our new series of Brushless Outrunner Motors. These motors raise the bar in both quality and performance, and are establishing themselves as the new Gold Standard for model aircraft power! All of the Scorpion Brushless Motors are manufactured from the finest quality components using state of the art CNC machine tools. Every component of the motors are of the highest quality, from the materials used, to the box they ship in. They are designed to provide reliable power for your model aircraft at affordable prices, offering a total performance solution.

Scorpion Motors are designed from the ground up with the best quality components available to provide an excellent value for you, the R/C modeler. We utilize high quality aluminum alloys that are CNC machined and anodized for a fit and finish that is second to none. Unlike other motor manufactures that use off-the-shelf N50 NdFeB magnets with a maximum Curie temperature of 80 to 100 degrees C, our motor magnets are custom manufactured to be able to withstand temperatures of up to 200 degrees C (392 F) while still providing N50 magnet strength. The wire we use to wind the stators is rated to 180 degrees C (356 F), so it can take the heat and keep on performing. This all adds up to a motor that can provide you the power you need, without going up in a cloud of smoke if you push it a little too hard. With all these features, you would expect to pay top dollar for a motor of this caliber, but with our efficient manufacturing procedures and streamlined distribution chain, Scorpion motors retail for about 1/2 the price of other "Name Brand" Brushless Motors, making them one of the best overall values on the market today. We are so confident in the quality of our motors that we back them with a 2-Year Warranty against defects in materials and workmanship. You deserve the the best quality motor available at an affordable price, so the next time you need a brushless motor, do yourself a favor and give Scorpion Brushless motors a try, you will be glad you did!

 

For a complete power system, combine a Scorpion motor with one of our new Commander series Brushless Speed Controllers, to get a matched package that provides both Precision and Performance for your model!

The Top Ten Reasons Why You Should Try Scorpion Brushless Motors

1. Machined aluminum front housing with 5 angled cooling holes that pump air through the motor while it runs.
2. Rear threaded mounting holes with both 16 mm and 19mm hole spacings fit a variety of applications.
3. A machined aluminum cross style mount with hardware and a threaded prop mount is included with every motor, along with a wobbly adapter on select models.
4. Specially designed N50 NdFeB magnets with a 200 C (392 F) temperature rating for trouble-free operation.
5. Durable black Electro-Coat finish on the flux ring to look good for years to come. We also laser engrave our logo and model number on each motor instead of using a sticker to help maintain the balance of the motor.
6. Rear locking ring maintains magnet spacing and also helps to strengthen the rear end of the flux ring assembly. 
7. High quality stator plates are epoxy coated on the inner surface to prevent winding shorts. 0.20mm stator plates are used on the 22mm motors, with 0.35mm stator plates on larger sizes.
8. High Temperature 180 C (356 F) rated wire is used for winding the motors to minimize the risk of burning up the motor. The motors are also machine wound to ensure consistant winds.
9. High quality shielded and permanently lubricated ball bearings are used to support the motor shaft in all our motors.
10. High temperature adhesives are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out .

Brushless Speed Controllers

 

To compliment our fine line of Brushless Motors, Scorpion is proud to introduce the Commander Series Brushless Speed Controllers. These brushless controllers are built from top quality parts and are designed to provide you with trouble-free operation. With 9 sizes available, ranging from 11 amps up to 110 amps, you will be sure to find a motor controller to suit your needs.

Each Commander Speed Controller is also designed to look as good as it performs with a gold anodized, stamped aluminum heatsink plate. The heatsink plate is ribbed to provide additional surface area, and is bonded to the FET’s below with thermal conductive heat transfer tape to insure maximum heat dissipation. All of the controller specs are clearly printed on each ESC so you will never have to wonder what the current rating is or how many cells it can operate on.

All of the Commander Series Speed Controllers are designed to operate from 6 to 15 VDC, so they can be used with 5-12 cell Ni-MH or Ni-Cad battery packs, 2-4 cell Lithium Polymer battery packs, or 2-4 cell A123 type battery packs. Unlike some speed controllers that need to have the current de-rated at the maximum cell count, all of the Commander Series Speed controllers can be safely operated on the maximum stated cell count at full rated current. Because our Speed Controllers are built to such high standards, we guarantee performance by covering them with a 2-Year warranty against defects in materials and workmanship.

At Scorpion Model Products, we believe that you should be able to have full use of your Brushless Speed Controller the day you receive it. So instead of charging extra for an "optional" programming module, we include one with every one of our Commander Series Speed Controllers at no extra charge!The Scorpion Programming Module is included with every Commander ESC at no extra charge! The included ESC Programming Module allows the user full control to set all of the available ESC program parameters. You simply set the DIP switches to the proper settings, plug the Programming Module into the receiver lead on your Commander ESC and plug in a battery. After start-up, you push a couple buttons to upload the program and you are done! For complete details of the Programming Module Features check out the Programming Guide page.

The Commander Series Brushless Speed Controllers are being released after more than a year of R&D and field testing to insure that they will perform well with just about every receiver and motor available today. Our unique "Jump Start" programming feature provides a boost of extra power on the first throttle-up to insure consistant motor start-ups. This is especially useful for high Kv inrunner type motors that can occasionally be difficult to start. The Commander Series Speed Controllers also include built-in over-current and over-temperature sensing circuitry that reduces the power to the motor if safe operating limits are exceeded. This helps to prevent your speed controller from going up in a puff of smoke if you should accidently push it too hard.