Homepage » Electric Section » Chargers » POWER PEAK FUN DUO-POWER

POWER PEAK FUN DUO-POWER

Small Quantity

Charge- discharge station with battery management, for batteries consisting of 1 .. 24 NC / NiMH cells and 1 .. 8 LiPo cells, with a maximum charge current of 6.5 A.
Can be powered by a 12 Volt car battery or by the 230 Volt mains using the integral switch-mode mains power supply. Twice the fun in one charger!

Broad current range of 0.1 to 6.5 A makes the charger suitable for small slow-fly batteries, transmitter and receiver packs, and also for large drive / flight batteries.
The high maximum charge current is particularly important for large-capacity Lithium batteries in order to keep charge times reasonably short.

Incorporates the robbe BID system: safe and easy to use, plus automatic storage of the essential data for each individual battery.

BID stands for Battery IDentification system. The BID chip passes the essential parameters to the charger.
Press a button, and the charge process begins.

No tedious searching through menus for the set-up parameters

Maximum protection from mis-handling

Storage of relevant battery in the BID chip- These are the special advantages of the BID system.

Naturally, the Power Peak Fun charger can also be used with non-BID system batteries!

Functions:

Charge

Discharge

Cycle, 1 .. 3 x discharge - charge

Display of charge - discharge time

Display of charged-in and discharged capacity

Display of charge, peak and input voltage

Display of the last five charged-in or discharged capacity values

Adjustment of discharge current, charge current and cell count.

NC / NiMH batteries

1 .. 24 cells

With automatic digital Delta-Peak charge cut-off circuit, terminates the charge process at the correct point; settings to match NC and NiMH batteries.

LiPo batteries

1 .. 8 cells

Automatic charge cut-off circuit using the CC-CV charge process, which terminates the charge at a final voltage of 4.2 Volts per cell.

Specification:
Input voltage: 10...15 Volt-DC oder 230 V AC
Charge termination: automatisch
Dimensions: 180 x 130 x 60 mm
Charge current: 0.1...6.5 A (max.130/90 W) A
No. of NC cells: 1...24 NC/NiMH 1...8 Lipoly