MAP Micro antenna

Manufacturer
Reward Points	22
Location	V9

Micro Power Antenna

Designed for Micro Helicopters.
Great for parkflyers and foamy 3D aircraft (indoors)

Specs:
82mm long Power Antenna
Signal loss is only 12%
Weighing in at 1.8 grams.

Includes:
1 Micro Antenna and Shrink Tubing.

Work with Frequencies:
35mhz, 36mhz, 40mhz and 72mhz

MAP Power Antenna Installation instructions

Cut original receiver antenna to 4 to 6 inches ( 100-150mm) from the case, and then strip the receiver end.
slide the enclosed 1/2 inch heat shrink tubing over the receiver wire, then solder to the M.A.P Antenna.
Now, carefully cover the solder joint with the heat shrink tubing and shrink.
Glue (Ca or Hot Glue) or zip or use double tape to attach the M.A.P antenna to the landing skids or fuselage.

Always make sure it's away from any metal or carbon fiber objects.
The best place on the helicopter is on the landing skids with the antenna pointed out the front.

Always Range Check Before Flying