Homepage » Helicopter Kits » Logo » LOGO 500 3D with V-bar

LOGO 500 3D with V-bar

Manufacturer
Reward Points	1798
Location	2FL

LOGO 500 3D will perform excellent with a 5S pack. If equipped with a 6S pack however, you will go to a completely new dimension of heli flying. The kit includes several extras for 3D flying, such as all levers fully ball-raced, aluminium swashplate, and light 3D paddles.

Included:

LOGO 500 3D kit with VBar rotor head and V-Bar electronic

Superlight, extremely rigid mainframe:

The mainframe is made from glassfiber-reinforced polymer material and manufactured by injection moulding. An advantage of this type of mainframe is that it allows for much greater freedom in designing than is the case with a mainframes which are assembled by screwing flat carbon parts together. Consider the placement of the servos for example. We have integrated the three (standard- or midsize) swashplate servos into the frame by providing slots for each one. In this way the servos are very easy to install and the linkages can be kept short and perfectly aligned. Also the entire mainframe is optimized for weight and extremely rigid at the same time.

Herringbone main gear:

Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter.
Its main advantages are:

Considerably more transmission efficiency
Very smooth running
Extremely low noise level

Features:

Constant tail drive
Fully ball-raced
Hollow 10 mm main rotor shaft
8 mm spindle shaft
lCarbon tail boom support
Thrustbearing set for tail rotor with steel hub
3D vertical and horizontal fins
Alu swashplate
Light 3D paddles
Standard-size and midi-size servos can be used
CG can be determined exactly by adjusting battery position

Specifications:

Rotor diameter: 1150 to 1190 mm
Rotor blades: 500mm/520 mm
Gear ratio main rotor: 8.7 to 12.8; Mod. 0.5
Weight: 2.2 kg and up
Battery: 5S to 6S Lipo cells