Homepage » AutoPilot & V-Bar » Flight Stabilizer

Flight Stabilizer

Small Quantity

Flight attitude stabilising system for the roll-axis and pitch-axis in model helicopters. If the helicopter gets into a critical position: simply let go of the swashplate control stick - and the Stabilizer automatically returns the model to the horizontal attitude.The Stabilizer works for normal flight, the Stabilizer 3D works for normal + inverted flight, at any time, night and day. Both can operate with 90° and 120° swash plates, mechanical and electronical mixers, recognize automatically if it is a 90° or 120° swash plate, all PPM receivers, all Futaba PCM and all Graupner SPCM receivers, work with normal and digital servos. The sense is adjusted by a free chanel (if available) or by the on board potentiometer. Using a separate chanel for the sense makes it possible to program two mixers reducing the sense, when you have bigger nick/roll commands. It works on infrared basis and can be used only outdoor. The restrictions are, that it doesn´t work good when it is raining, snowing and on foggy whether or low stratos. In such cases it is better to fly with sense 0%, without the stabilisation. The Stabilizer / Stabilizer 3D are a great help for beginners, 3D beginners, also as an "emergency exit" for experts (failsafe), for aerial photography and video, two Stabilizers can be used both for heicopter and photo/video platform.Highly versatile: as a take-off aid for the beginner as a useful support for the advanced flyer (e.g. with scale models) as a "safety net" for the specialist for photographic and video helicoptersSpecification:: Voltage: 4V-10V Volts current: 7 mA Features:For helicopters with and without flybar, compatible with all PPM receivers, with all Futaba PCM receivers (PCM 1024 and PCM G3) and all JR/Graupner SPCM receivers. Compatible with analogue and digital servos. Variable gain (sensitivity) from the transmitter or the control unit; automatic gain setting detection from the transmitter. Compatible with 2-servo 90° linkages and 3-servo 120° linkages, automatic detection of swashplate linkage type, controls 2 or 3 servos. 90° linkages with 3 or 4 servos (H4) are not supported (an H4 90° version is in preparation; available Summer 2005). For use in the open air only. Compact units, low weight. Control unit: 22x24x12mm, 16g Sensor unit: 34x34x11mm, 22g