This power unit is suitable for aerobatic models with weight between 240–400g.
 It allows you to fly innovative aerobatic spins, which makes flying even more attractive .To control the prop, one more microservo should be fitted onto the model. It is required to use a servo with a minimum torque of 1.1kg/cm. To control the pitch independently, it is also necessary to use a receiver with a sufficient number of channels so extra channel needed.
The best option is to use a transmitter with heli mode, which has special software allowing optional configuration of pitch and engine revs.
Technical data
Diameter 240mm
Variable pitch ±45°
Motor Outrunner 1200 RPM
up to 10 AMPS
45 GR